Chemicals › sepro › cutrineultra

CutrineUltra

SePRO · Copper 9% · EPA Reg 67690-98 · Insecticide Document last checked 2026-05-30

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 67690-98 →

Cutrine® Ultra is an algaecide, herbicide, and cyanobactericide used to control various types of algae and certain aquatic plants. Its active ingredient is a Copper ethanolamine Complex, which provides 0.9 lbs of elemental copper per gallon. It is designed for use in diverse water bodies including lakes, rivers, potable water reservoirs, farm/fish ponds, irrigation systems, and stormwater detention ponds. The product controls planktonic (suspended) algae, filamentous (mat-forming) algae, benthic (bottom-growing) algae, and specific rooted aquatic plants like Hydrilla verticillata and Egeria densa. Application methods include surface spray/injection, slow-flowing or quiescent water applications, and drip systems for irrigation conveyance systems. When using the drip system, the product helps prevent clogging of headgates and suction screens. Users should note that copper levels must be managed to avoid environmental hazards to aquatic organisms. Handling requires specific PPE, including long-sleeve shirts, long pants, socks, shoes, and goggles or a face shield. Always follow specific dilution and application rate charts provided in the label for the specific water depth and algae density to ensure effective control and safety.

Pests covered (1)
Planktonic algae, Cyanobacteria, Filamentous algae, Benthic algae, Hydrilla verticillata, Egeria densa
Areas treatable (1)
Lakes, rivers, potable water reservoirs, farm/fish ponds, golf courses, industrial/irrigation/recreational/stormwater ponds, hatcheries, raceways, and irrigation conveyance systems

How to treat each type of area 1

Lakes, rivers, potable water reservoirs, farm/fish ponds, golf courses, industrial/irrigation/recreational/stormwater ponds, hatcheries, raceways, and irrigation conveyance systems

Varies
Target pest Location Rate Unit Dilution Label notes
Planktonic algae, Cyanobacteria, Filamentous algae, Benthic algae, Hydrilla verticillata, Egeria densa Outdoor Varies based on algae density and water depth PPM (Parts Per Million) copper Varies; see Table 1 and Table 2 Check local regulations for use in public waters.

Mixing instructions 1

For pests Location Amount Per Finished strength Label notes
General Algae Control Outdoor See Table 1 Per Acre-Foot Target PPM copper Use Table 1 to determine copper concentration based on algae growth density.

Worker safety

PPE required Long-sleeve shirt, long pants, socks, shoes, goggles or face shield, and rubber gloves. Wear protective eyewear, clothing, and chemical-resistant gloves.

Timing & weather

Use restrictions 4

Label SDS
Active ingredient Copper 9%
Catalog source document available. The local copy is still withheld until its exact product identity, role, and full file hash are accepted. Open the catalog source label ↗ and verify the product name, EPA registration number, and revision before relying on it.
Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.
Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.